Watchdog Timer
Description:
This function gets the value that is loaded into the watchdog timer when the count reaches
zero for the first time.
See also:
ROM_WatchdogReloadSet()
Returns:
None.
25.2.1.9 ROM_WatchdogReloadSet
Sets the watchdog timer reload value.
Prototype:
void
ROM_WatchdogReloadSet(uint32_t ui32Base,
uint32_t ui32LoadVal)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_WATCHDOGTABLE is an array of pointers located at ROM_APITABLE[12].
ROM_WatchdogReloadSet is a function pointer located at ROM_WATCHDOGTABLE[8].
Parameters:
ui32Base is the base address of the watchdog timer module.
ui32LoadVal is the load value for the watchdog timer.
Description:
This function sets the value to load into the watchdog timer when the count reaches zero for
the first time; if the watchdog timer is running when this function is called, then the value is
immediately loaded into the watchdog timer counter. If the ui32LoadVal parameter is 0, then
an interrupt is immediately generated.
Note:
This function will have no effect if the watchdog timer has been locked.
See also:
ROM_WatchdogLock(), ROM_WatchdogUnlock(), ROM_WatchdogReloadGet()
Returns:
None.
25.2.1.10 ROM_WatchdogResetDisable
Disables the watchdog timer reset.
Prototype:
void
ROM_WatchdogResetDisable(uint32_t ui32Base)
346 April 8, 2013
To Next Page
Loading...
Need help?
General
