EasyManua.ls Logo

Texas Instruments Tiva TM4C123GH6PM User Manual

Texas Instruments Tiva TM4C123GH6PM
352 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #349 background imageLoading...
Page #349 background image
Watchdog Timer
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_WATCHDOGTABLE is an array of pointers located at ROM_APITABLE[12].
ROM_WatchdogStallEnable is a function pointer located at ROM_WATCHDOGTABLE[13].
Parameters:
ui32Base is the base address of the watchdog timer module.
Description:
This function allows the watchdog timer to stop counting when the processor is stopped by the
debugger. By doing so, the watchdog is prevented from expiring (typically almost immediately
from a human time perspective) and resetting the system (if reset is enabled). The watchdog
will instead expired after the appropriate number of processor cycles have been executed while
debugging (or at the appropriate time after the processor has been restarted).
Returns:
None.
25.2.1.15 ROM_WatchdogUnlock
Disables the watchdog timer lock mechanism.
Prototype:
void
ROM_WatchdogUnlock(uint32_t ui32Base)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_WATCHDOGTABLE is an array of pointers located at ROM_APITABLE[12].
ROM_WatchdogUnlock is a function pointer located at ROM_WATCHDOGTABLE[6].
Parameters:
ui32Base is the base address of the watchdog timer module.
Description:
Enables write access to the watchdog timer configuration registers.
Returns:
None.
25.2.1.16 ROM_WatchdogValueGet
Gets the current watchdog timer value.
Prototype:
uint32_t
ROM_WatchdogValueGet(uint32_t ui32Base)
ROM Location:
ROM_APITABLE is an array of pointers located at 0x0100.0010.
ROM_WATCHDOGTABLE is an array of pointers located at ROM_APITABLE[12].
ROM_WatchdogValueGet is a function pointer located at ROM_WATCHDOGTABLE[10].
April 8, 2013 349
Question and Answer IconNeed help?

Do you have a question about the Texas Instruments Tiva TM4C123GH6PM and is the answer not in the manual?

Texas Instruments Tiva TM4C123GH6PM Specifications

General IconGeneral
CoreARM Cortex-M4F
Clock Speed80 MHz
Flash Memory256 KB
SRAM32 KB
GPIO Pins43
UART8
I2C2
SPI/SSI4
USBUSB 2.0
Timers6
Communication InterfacesUART, I2C, SPI, USB
Operating Temperature-40°C to 85°C
PackageLQFP64

Summary

Boot Loader

Introduction

Explains the ROM-based boot loader and its interfaces for flash updates.

Serial Interfaces

Details the UART, SSI, and I2C interfaces used by the boot loader.

USB Interface

Describes the USB boot loader functionality using the DFU protocol.

Controller Area Network (CAN)

Flash

GPIO

Hibernation Module

Inter-Integrated Circuit (I2C)

Interrupt Controller (NVIC)

Memory Protection Unit (MPU)

Pulse Width Modulator (PWM)

Synchronous Serial Interface (SSI)

System Control

Timer

UART

uDMA Controller

USB Controller

Watchdog Timer

Functions

Lists and describes API functions for watchdog timer configuration, interrupts, and lock mechanism.

Related product manuals