www.texas.dk
23
-
Always stop the engine and take off the lid of the spark plug before making
adjustments or repairs. Only exception is
when adjusting the carburetor.
-
Only use original spare parts. If not you may experience bad performance or injury
and the warranty is invalid.
!
Examine the tool for loose bolts and nuts, leakage etc. Replace any
damaged parts. Replace the trimmer head if it
is cracked, chipped or
damaged in any other way.
!
Make sure that the trimmer head is fitted correctly and securely fastened. If
not this may lead to serious personal injury.
! Make sure that all safety guards and handles are correctly and securely
fastened.
!
The cord head rotates while the carburetor is adjusted. Wear protection and
follow all safety instructions.
!
Let the engine cool off before storage.
!
Empty the fuel tank and fasten the trimmer when it is transported.
-
Tanking (SMOKING IS FORBIDDEN)
!
Mix an
d store fuel in only approved containers
!
Mix only fuel outdoors in areas withouth any appearance of sparks or flames.
! Choose an empty area, turn off the engine and let it cool for a minimum of 2
minutes before tanking.
!
Loosen slowly the fuel cover and av
oid the fuel from floating beneath the
cover.
!
Clean for any spilled fuel, Move it 3 meters away from the filling spot before
the engine is started.
1. Trimmer head
2. Blade
3. Safety guard
4. Handle
5. Shaft
6.
Ignition switch on/off
7. Choke
To Next Page
Loading...
