Operating the Alarm System Premier 412/816/832 Master User Manual
10 INS141-8
Group Bypass
The Group Bypass feature allows you to bypass a
predefined group of zones. The alarm system has up to four
groups.
To bypass a group of zones, proceed as follows:
The keypad will display the bypasse d zones .
If re quire d, zones c an be added or removed from the
group by entering the require d zone number ,
e .g. E nter to add Zone 5 .
Enter bypass group
- followed by
Enter Access code
1
2
3
T he s elec ted zone is now bypa s s ed. Re peat step 3 to
bypass additional zones.
4
5
Once the selected zones have be en bypa s s ed pre ss :
/ t o Aw a y a r m
to S tay arm
t o r et ur n to the no rm al d is a rm e d st ate
3
3
3
If the Quick Bypass feature is enabled, you can omit
step 1 from the above procedure.
When one or more zones are bypassed the Ready
light will flash and if the system is fitted with a Premier
RKP8/16 Plus or LCD remote keypad then the Bypass
light will also illuminate.
Quick Bypass and Arm
The Quick Bypass and Arm feature allows you to bypass a
predefined group of zones and Away or Stay arm the
system. The alarm system has up to four groups.
To Quick Bypass a group of zones and Away arm,
proceed as follows:
Enter bypass group
-
1
2
3
Press
Press
The a nd lights will flash and the exit tone
will sound.
A rmed R ea dy
Whe n the s ys te m is Awa y arm ed
with the s elec ted gro up o f z o ne s bypa s se d.
ex i t to n e s to p s , th e
To Quick Bypass a group of zones and Stay arm,
proceed as follows:
E nter bypass group
-
1
2
3
Press
The alarm system will arm immediately a nd the
and lights will fla sh.
Armed
Ready
T he s ys tem is S t a y a rm e d with th e s e le cte d gr o up o f
zones bypassed.
3
3
The Quick Arm feature must be enabled to use this
feature.
To Next Page
Loading...
