Operating the Alarm System Premier 412/816/832 Master User Manual
8 INS141-8
Arming and Disarming Partitions
This section covers arming and disarming partitions. In
order to use these procedures the following requirements
must be configured:
• The alarm system must be split into one or more
partitions.
• Your Access code must be assigned to more than one
partition.
• The keypad that you use to operate the alarm system
must be assigned to multiple partitions OR your Access
code is enabled for Global Access.
Away Arming Partitions
This option allows you to Away arm one or more partitions.
To Away arm selected partitions, proceed as follows:
The light will flash quickly.R ea dy
Press - to select/deselect partitions,
e.g. Press to select Partition 2.
Press
Enter Access code
1
2
3
P ar titio n 2 is no w s el ec ted .
4
Press
Press
The light will flash and the exit tone will sound.A rmed
5
Leave the area being armed, whe n the p a r ti tion h a s
armed the exit tone will stop. The selected partition(s) is
now Away a rme d.
3
3
3
3
If the Quick Arm feature is enabled, you can omit step
1 from the above procedure.
Stay Arming Partitions
This option allows you to Stay arm one or more partitions.
To Stay Arm selected partitions, proceed as follows:
The light will flash quickly.R ea dy
Press - to select/deselect partitions,
e.g. Press to se lect Pa rtition 1.
Press
Enter Access code
1
2
3
Partition 1 is now selected.
4
Press
5
T he s ele cted partition(s) will a rm immediately and the
light will flash.A rmed
The s electe d partition(s) is now armed.S ta y
3
3
3
3
3
Disarming Partitions
This option allows you to disarm one or more partitions.
To disarm selected partitions, proceed as follows:
The light will flash quickly.R ea dy
Press - to select/deselect partitions,
e.g. Pres s to se lect Pa rtition 2.
Press
Enter Access code
1
2
3
Partition 2 is now selected for disarm.
4
Press
5
T h e s ele c ted p ar titio ns a re dis a rm e d.
Press
3
3
3
3
To Next Page
Loading...
