Premier Elite Series User Guide
INS221-4 9
Quick Guide
Operation Description Action
To Full Arm the System Enter a valid User code
Press Yes (or press Chime to arm silently)
or
To Part Arm the System Enter a valid User code
Press Part
Select Required Part Arm
,
or
Press Yes (or press Chime to arm silently)
or
To Arm Individual Areas Enter a valid User code
Press Area
Select Required Area using keys 1 - 8
-
Press Yes (or press Chime to arm silently)
or
To Disarm the System Enter a valid User code
Press Yes (if the entry mode was not started)
To Cancel the Exit Mode Enter a valid User code
Press Yes
To Clear an Arm Fail Enter a valid User code
Press Reset
To Silence an Alarm Enter a valid User code
To Reset After an Alarm Enter a valid User code
Press Reset
To Engineer Reset Contact Your Installation Company
To Anti-code Reset Enter a valid User code
Press Reset
Contact Your Alarm Receiving Centre
Quote 4-digit code shown on display
Enter 4-digit code given by Receiving Centre
Press Yes
To Omit Zones Enter a valid User code
Press Omit
Enter Zone Number(s)
…
Press Omit to toggle omit status on/off
Press Menu when finished
Press Yes to Arm
Turn Chime On/Off Press Chime Once to Turn ON
Press Chime Again to Turn OFF
To Change User Code Enter a valid User code
Press Menu followed by Yes
Press 2 followed by Yes
Enter a new 4, 5 or 6 digit User code
Press Yes to accept
Press Reset to return to the normal display
To Next Page
Loading...
