Texi Art Auto 2 Instruction Manual

1 Button Displays and Operating Instructions
1.1 Key Description
Name key Indicate
Function Parameter
Edit
If click, enter or exit the user parameter setting interface.
If long-press, it will switch to the password input interface. Enter the correct password, press S key to
confirm, you can enter the advanced parameter setting interface.
Setting Parameter
Check and Save
For the content of the selected parameters check and save: after select parameter press this key to
check and modify operation, after modified parameter value press this key to exit and save the
parameter.
Parameter Increase
If click, increase the parameter.
If long-press, continuously Increase the parameter.
Parameter Decrease
If click, decrease the parameter.
If long-press, continuously decrease the parameter.
Reset Long-press can restore factory setting.
Start Back-tacking
Selection / Slow
Launch Setting
If click, switch AB start back-tacking→ABAB start back-tacking→function off→B start back-tacking
successively.
If long-press, set used or cancelled slow launch function.
End Back-tacking
Selection / Needle
Stop Position
Selection
If click, switch CD end back-tacking→CDCD end back-tacking→function off→C end back-tacking
successively.
If long-press, the needle stop position after shift the sewing mode (Up position / Down position).
Free Sewing /
Constant Stitch
Sewing
If click, set to free sewing mode.
If long-press, set to constant stitch sewing mode.
Consecutive Reverse
Sewing /
Multi-section
Sewing
If click, set to consecutive reverse sewing mode.
If long-press, set to multi-section sewing mode.
Automatic Presser
Foot Lifting Setting /
Auto Function
If click, switch function off→automatic presser foot lifting after trimming→automatic presser foot
lifting after pause→full function successively.
If long-press, set used or cancelled auto function.
Trimming Setting /
Clamp Function
Setting
If click, set used or cancelled trimming function.
If long-press,
set used or cancelled clamp function.
Pattern Freedom
Sewing Setting
If click, switch to pattern freedom sewing mode selection interface.
If long-press, switch to pattern freedom sewing mode editing interface.
Tight Seam Setting If click, switch starting tight seam, ending tight seam, full function and function off successively.
Pattern
Backing-tacking
Setting
Set used or cancelled pattern backing-tacking function.
Pattern
Constant-stitch
Sewing Setting
Set used or cancelled pattern constant-stitch sewing function.
Stitches Length
Setting
If click, increase or decrease stitches length.
If long-press, continuously increase or decrease stitches length.

Texi Art Auto 2 Specifications

General

Brand	Texi
Model	Art Auto 2
Category	Sewing Machine
Language	English