Speed Increase
If click, increase the sewing speed.
If long-press, continuously increase the sewing speed.
Speed Decrease
If click, decrease the sewing speed.
If long-press, continuously decrease the sewing speed.
1.2 Auxiliary Function
1.2.1 Debugging Mode
On the main interface, long-press S key to enter to the debugging parameter interface.
1.2.2 Tight Seam Mode Editing
On the main interface, long-press tight seam key to display "F-1" (start back-tacking), and press the 4th
column
, to switch between "F-1" (start back-tacking) and "d-2" (end back-tacking), press S to
confirm, switch to the editing interface "01 0 0.5", press the 1st or 2nd column
, to adjust the number
of stitches of 00-12, press the 4th column
, to adjust 0 ( Normal sewing) -1 (reverse sewing). Press
to adjust the stitch length. After the setting is completed, press S key to confirm. Click P key to exit
to the main interface.
1.2.3 Pattern Freedom Sewing Mode
On the main interface short-press
to shift pattern freedom sewing mode selection interface "n1"，
press
to adjust n1-n9.
1.2.4 Pattern Freedom Sewing Editing
On the main interface long-press
to shift pattern freedom sewing mode editing interface“n-01 01”，
short-press the 4th column
, to adjust n01-n09, short-press adjust 01-10 segment number,
adjust to setting pattern number, segment number, short-press S key to confirm, shift to corresponding pattern
number editing interface “01 1 3.0”， short press 1st column or 2nd column
, to adjust 00-99 stitches,
short-press 4th column
, 1-9 repeat times, short-press to adjust needle distance, after
finished setting short-press S key to confirm. Press P key can exit to interface.
1.2.5 Pattern Backing-tacking Sewing Editing
On the main interface, long press to switch the pattern style editing interface "H-01 01", press the 4th
column , to adjust the H01-H09 pattern number, and short press to adjust the 01-10
segment number, segment number, short press S key to confirm, switch to the corresponding pattern number
To Next Page
Loading...
