Texi Tegra 4 User Manual

EN
According to color
threading diagram,
Follow the 4-7 steps
(go down).
Guide the thread
through hole (8).
According to the
figure, the thread
from the right behind
the embedding gap
inside (B).
The thread from
front to back
through the hole
(C), be careful: The
thread must be
stuck in the groove.
Pull about 10cm of
thread through the
lower looper hole
and put it under the
presser foot.
Tip: For 3-thread overlock and 3-thread decorative
overcasting, the stitch will be more beautiful if not
threading through step 8.
Note: Please use the tweezers in accessories box to help threading.
THREADING THE RIGHT NEEDLE
Draw the thread
through the
guide 6 and 7.
Follow the step 8 and
step 9. Pull about 10cm of
thread through the right
needle hole and put it
under the presser foot.
Follow the
1-9 steps.
Texi Tegra 4
83
Texi Tegra 4 INSTRUKCJA 2019.indb 83Texi Tegra 4 INSTRUKCJA 2019.indb 83 18.09.2020 09:4218.09.2020 09:42

Texi Tegra 4 Specifications

General

Brand	Texi
Model	Tegra 4
Category	Sewing Machine
Language	English