Texi Tegra 4 User Manual

EN
Fabric/Eect
Dierential setting
Gather Ordinary Dispersed
<2,0> <1.0> <0.5>
Light, thin fabric: Silk, satin, taeta, lining
cloth, poplin etc.
· ·
Ordinary fabric: Light cotton fabric,
medium thickness cotton fabric, warm
clothes etc.
·
Knitted fabric: Sweaters, Polo fabric, warp
knitted fabric etc.
· ·
Thick knitted fabric: Shirt fabric, thick
cus, knitwear etc.
·
Stretch ripple eect: Medium and
lightweight fabric ,Sports shirt, Knitwear,
The sleeves and collar hem ,Skirt hem etc.
·
Crimp: Thin cloth and lace hem, the
edge of a blouse , shirt, skirt, edge of the
pocket, ribbon, lapel, cu edge etc.
·
THE FOLLOWING TABLE SHOWS THE VARIOUS DIFFERENTIAL SETTINGSREQUIRED FOR
VARIOUS FABRICS.TRY SEWING ON THE SAMPLE BEFORETHE FORMAL SEWING BEGINS.
TO SET THE DIFFERENTIAL FEED ADJUSTING
• Set dierential feed adjusting lever knob below
graduation “1.0”.Setting of adjusting lever knob
depends on material being sewn as well as the
amount of gather therefore set knob to suit the
fabric and test sew before sewing your garment.
• When feed regulating dial is set “3” or over, the
amount of feed of the main feed dog will change
to “3” automatically when adjusting lever knob
is set to 2.0 Note: For normal overedge stitching,
set dierential feed adjusting lever knob to
graduation “1.0”.
Texi Tegra 4
92
Texi Tegra 4 INSTRUKCJA 2019.indb 92Texi Tegra 4 INSTRUKCJA 2019.indb 92 18.09.2020 09:4218.09.2020 09:42

Texi Tegra 4 Specifications

General

Brand	Texi
Model	Tegra 4
Category	Sewing Machine
Language	English