5. Information about your pump
The discharge of a pump depends on the static suction
lift. During summer, the static suction lift increases
due to drop in water levels, and this result in reduced
discharge. This will require frequent lowering of
the pump to reduce the static suction lift. During
monsoons, water levels can significantly rise. Under
such conditions, there is a possibility that the pump can
get submerged, resulting in the motor getting damaged.
Such issues are overcome by the use of an Openwell
Submersible pump as it operates submerged in water.
Texmo Openwell Submersibles are manufactured using
high quality raw materials and components using state-
of-the-art manufacturing facilities and will give trouble
free performance if properly installed and maintained.
The Openwell Submersible is a compact pumping
system with the pump and motor mounted on a
common shaft. As a coupling is not required, alignment
of the pump and motor is assured. Installation is
therefore quick and easy. Openwell Submersible do
not require frequent maintenance as the packing
rope and grease lubricated deep groove ball bearings
are replaced by oil seals and water lubricated journal
bearings respectively. Openwell Submersible find
application irrigation of farms, domestic water supply,
cooling water circulating systems, fountains, dairies,
water supply to high rise buildings, housing complexes,
bungalows, cattle and poultry farms.
Prior to installation, read this manual carefully
and follow the instructions for installation and
maintenance of our Openwell Submersibles so as to
ensure reliable operation. The Openwell Submersibles
should be installed by technically qualified personnel
in compliance with national and local electrical codes
and as per our instructions in order to avoid electrical
shocks, unsatisfactory performance and
equipment failure.
OMOW001A 5 2020.01
To Next Page
Loading...
Need help?
General
