Textron Bell 206L3 - 300-Hour Airframe Progressive Inspection - Event No. 5

BHT-206L3-MM-1
5-00-00
25 FEB 2011 Rev. 16 Page 75
ECCN EAR99
PROGRESSIVE INSPECTIONS
5-25. 300-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 5
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
ZONE 7 — CABIN INTERIOR
Chapter 11 PLACARDS AND MARKINGS
1. Examine the placards, decals and markings. Ensure they
are readable, correctly applied and in agreement with the
applicable configuration of your helicopter.
BHT-206L3-FM-1
(BHT-206L4-FM-1 for
206L3+ IGW
Upgrade)
INSTRUMENTS
1. Examine instruments and instrument panel for condition,
security and for correct markings.
AIRFRAME
Chapter 25 1. Remove cabin overhead upholstery, hat bin, soundproofing
blanket, aft vertical tunnel covers, and roll-over bulkhead access
panels.
Chapter 53 2. Remove roof beam access panels.
Chapter 67 3. Examine flight control tubes inside roof beam for condition
and security.
Chapter 53 4. Examine roof beam and roof shell structure for condition.