BHT-206L3-MM-1
5-00-00
Page 10 Rev. 21 7 JUN 2013 Export Classification C, ECCN EAR99
• 1200-hour inspection
• As required by manufacturer
• Weekly inspection
• 12-month inspection
• 12 months of component operation
• 24-month inspection
• 60-month inspection
• Deleted
• 600 hours of component operation
• 600 hours or 12 months of component
operation
• 1200 hours of component operation
• 1500 hours of component operation
• 1500 hours of component operation and every
50 hours thereafter
• 2250 hours or 60 months of component
operation
• 3000 Hours of Component Operation
5-15. CHANGING INSPECTION PROGRAM
You must use either the airframe periodic inspection
program or the airframe progressive inspection
program from the start. You can change between the
two programs at any airframe operating time as
follows:
• To change from a 100-hour airframe
progressive inspection program to a 100-hour
airframe periodic inspection program, do a
complete 100-hour airframe periodic
inspection.
• To change from a 100-hour airframe periodic
inspection program to a 100-our airframe
progressive inspection program, do a
complete 100-hour airframe periodic
inspection.
• To change from a 300-hour airframe
progressive inspection program to a 300-hour
airframe periodic inspection program, do a
complete 300-hour airframe periodic
inspection.
• To change from a 300-hour airframe periodic
inspection program to a 300-hour airframe
progressive inspection program, do a
complete 300-hour airframe periodic
inspection.
To Next Page
Loading...