EasyManua.ls Logo

Textron Bell 206L3 - 5-12. AIRFRAME PERIODIC INSPECTION PROGRAM; 5-13. 100-HOUR AIRFRAME PERIODIC INSPECTION PROGRAM; 5-14. 300-HOUR AIRFRAME PERIODIC INSPECTION PROGRAM

Textron Bell 206L3
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BHT-206L3-MM-1
5-00-00
25 FEB 2011 Rev. 16 Page 9
ECCN EAR99
• 1500 hours of component operation and every
50 hours thereafter
• 2250 hours or 60 months of component
operation
• 3000 hours of component operation
5-12. AIRFRAME PERIODIC INSPECTION
PROGRAM
The airframe periodic inspection combines all of the
events of the 100 or 300-hour progressive inspection
into one event.
NOTE
All conditions of Table 5-3 must be met to
utilize the 300-hour airframe periodic
inspection.
Depending on the helicopter configuration, you have
the option to either use the 100-hour airframe periodic
inspection program or the 300-hour airframe periodic
inspection program. To determine the helicopter
eligibility to utilize the 300-hour airframe periodic
inspection program, refer to Ta b le 5- 3.
5-13. 100-HOUR AIRFRAME PERIODIC
INSPECTION PROGRAM
Do a 100-hour airframe periodic inspection program
every 12 calendar months or every 100 hours,
whichever occurs first. You must do a minimum of one
complete 100-hour airframe periodic inspection within
12 calendar months.
In addition to performing the 100-hour airframe
periodic inspection program, you also need to perform
and record the following scheduled inspections:
NOTE
Every 300 hours of operation, helicopters
completing the 100-hour airframe periodic
inspection program also need to
accomplish the 300-hour inspection.
• 300-hour inspection
• 1000-hour inspection
• 1200-hour inspection
• As required by manufacturer
• Weekly inspection
• 12-month inspection
• 12 months of component operation
• 24-month inspection
• 60-month inspection
• 300-hour or 12-month inspection
• 600 hours of component operation
• 600 hours or 12 months of component
operation
• 1200 hours of component operation
• 1500 hours of component operation
• 1500 hours of component operation and every
50 hours thereafter
• 2250 hours or 60 months of component
operation
• 3000 hours of component operation
5-14. 300-HOUR AIRFRAME PERIODIC
INSPECTION PROGRAM
Do a 300 Hour Airframe Periodic Inspection Program
every 12 calendar months or every 300 hours,
whichever occurs first. You must do a minimum of one
complete 300 Hour Airframe Periodic Inspection within
12 calendar months.
In addition to performing the 300-hour airframe
periodic inspection program you also need to perform
and record the following scheduled inspections:
NOTE
Helicopters completing the 300-hour
airframe periodic inspection program also
need to accomplish the 100-hour
inspection.
• 100-hour inspection
• 1000-hour inspection

Table of Contents