BHT-206L3-MM-1
5-00-00
25 FEB 2011 Rev. 16 Page 135
ECCN EAR99
5-44. 2250 HOURS OR 60 MONTHS OF COMPONENT OPERATION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
TRANSMISSION
This inspection is applicable to transmission
assemblies 206-040-004-107 and subsequent
(206-040-004-115 and subsequent for 206L3+ IGW
Upgrade helicopters) that have been operating with
DOD-PRF-85734 oil since new or since last overhaul
(TB 206L-04-213).
If the transmission has been operated with
MIL-PRF-7808 oil, the 1500 Hours of Component
Operation scheduled inspection applies.
Chapter 63 1. If installed on the helicopter, remove the transmission
assembly.
2. Remove the mast and swashplate assembly from the
transmission assembly.
3. Inspect oil filter for debris and metal contamination.
BHT-206L-CR&O 4. Remove the transmission top case, the planetary
assembly, and the sun gear.
5. Visually examine all removed components for condition.
To Next Page
Loading...
Need help?
General
