BHT-206L3-MM-1
5-00-00
Page 136 Rev. 16 25 FEB 2011
ECCN EAR99
6. Insert a mirror between the spiral bevel gear edge and the
lower case and use a bright light to examine the spiral bevel
gear, input pinion gears, and surrounding areas for condition.
7. Reassemble the transmission.
Chapter 63 8. Install the mast and swashplate assembly into the
transmission assembly.
9. Apply sealant, primer, and paint to the required areas.
10. Install the transmission assembly into the helicopter.
Chapter 12 11. Service the transmission with oil (DOD-PRF-85734).
5-44. 2250 HOURS OR 60 MONTHS OF COMPONENT OPERATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...