Textron Bell 206L3 - SCHEDULED INSPECTIONS 5-43. 1500 HOURS OF COMPONENT OPERATION AND EVERY 50 HOURS THEREAFTER; SWASHPLATE SUPPORT 206-010-452-001;-005;-109

BHT-206L3-MM-1
5-00-00
ECCN EAR99
SCHEDULED INSPECTIONS
5-43. 1500 HOURS OF COMPONENT OPERATION AND EVERY 50 HOURS THEREAFTER
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
Chapter 62
ASB 206L-93-89
SWASHPLATE SUPPORT 206-010-452-001/-005/-109
NOTE
If windy conditions prevail, secure blades with
tie-down to prevent excessive main rotor flapping.
1. Thoroughly clean swashplate support base area using
drycleaning solvent (C-304) to remove all dirt, grease, and oil
residue, then wipe dry. Visually inspect full circumference of fillet
radius for cracks using a 10X magnifying glass. Pay particular
attention to aft side of swashplate support assembly.
2. If after accomplishment of step 1 a crack is suspected,
carry out further inspection by dye penetrant inspection method
(BHT-ALL-SPM, Chapter 6). Paint finish may be removed as
required in suspected area.
25 FEB 2011 Rev. 16 Page 133/134