Textron Bell 206L3 - Page 110

BHT-206L3-MM-1
5-00-00
Page 78 Rev. 16 25 FEB 2011
ECCN EAR99
Chapter 67 CONTROLS
1. Examine the collective control stick for condition and
security and minimum friction. Examine copilot collective control
stick if installed.
2. Examine the cyclic control stick for condition and security
and minimum friction. Examine copilot cyclic control stick if
installed.
3. Examine the anti-torque control pedals for condition and
security and minimum friction. Examine copilot anti-torque
control pedals if installed.
Chapter 96 ELECTRICAL
1. Verify operation of cockpit map reading light.
2. Verify operation of aft cabin reading lights (if installed).
CAUTION
USE EXTREME CARE WHEN IN PROXIMITY OF
PITOT TUBE WITH HEAT APPLIED, TOUCHING
TUBE MAY RESULT IN SERIOUS BURNS.
3. Verify operation of the pitot tube heating system.
4. Verify operation of defog blowers.
5. Verify operation of ENGINE OUT and LOW ROTOR RPM
audio and mute switch (if installed).
6. Verify illumination of all caution panel annunciator light
segments by depressing test switch, or each individual light
segment, as applicable.
7. Verify instrument lighting and dimming capabilities.
PROGRESSIVE INSPECTIONS
5-25. 300-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 5 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER