BHT-206L3-MM-1
5-00-00
Page 112 Rev. 16 25 FEB 2011
ECCN EAR99
Do not allow preservative oil (C-125) to contact tail
rotor blade bearings.
4. Apply a light coat of preservative oil (C-125) to all hub and
blade surfaces. Flood areas between main rotor hub grip tangs
and blades, latch bolts to grips, and yoke fillet areas just inboard
of pitch horn to ensure complete coverage.
5-33. WEEKLY INSPECTION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...