Textron Bell 206L3 - SCHEDULED INSPECTIONS 5-41. 1200 HOURS OF COMPONENT OPERATION; FREEWHEEL ASSEMBLY (WITH CLUTCH CL41742-1); MAIN ROTOR HUB ASSEMBLY

BHT-206L3-MM-1
5-00-00
ECCN EAR99
SCHEDULED INSPECTIONS
5-41. 1200 HOURS OF COMPONENT OPERATION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
Chapter 63 FREEWHEEL ASSEMBLY (WITH CLUTCH CL41742-1)
Chapter 63 1. Remove freewheel assembly.
BHT-206L-CR&O 2. Disassemble, clean, and visually inspect freewheel
assembly
3. Visually inspect clutch assembly, inner and outer race shaft
assemblies, and bearings for serviceability.
4. Assemble freewheel assembly.
Chapter 63 5. Install freewheel assembly.
BHT-206L-CR&O MAIN ROTOR HUB ASSEMBLY
1. Inspect yoke and trunnion bearing surfaces for brinelling.
2. Inspect yoke, latch bolts, strap pins, strap fittings, trunnion,
pillow blocks, grips, and pitch horns for corrosion.
3. Visually inspect all hub components for excessive wear or
damage.
25 FEB 2011 Rev. 16 Page 129/130