BHT-206L3-MM-1
5-00-00
ECCN EAR99
NOTES (CONT):
Freewheel assembly with clutch CL42250-1.
As applicable to 206L3+ IGW Upgrade Kit (BHT-206-SI-2052), input driveshafts 206-340-300-101/-105
must be overhauled at 5000 hours of operation and every 2500 hours of operation thereafter. Overhaul
is to be accomplished by Kamatics Corporation only. Return driveshaft to Bell Helicopter Textron (BHT)
per Information Letter (IL) GEN-04-98.
As applicable to 206L3+ IGW Upgrade Kit (BHT-206-SI-2052).
Table 5-4. Component Overhaul Schedule (Cont)
NOMENCLATURE PART NUMBER
OVERHAUL INTERVAL
(HOURS)
8 APR 2011 Rev. 17 Page 197/198
To Next Page
Loading...