BHT-206L3-MM-1
5-00-00
7 JUN 2013 Rev. 21 Page 25
Export Classification C, ECCN EAR99
9. Ensure no sealant voids are visible around forward and aft
nodal beam deck mounted supports and isolation mount.
Recoat with sealant (C-308) as required.
Chapter 63 MAIN DRIVESHAFT
1. Examine main driveshaft as follows:
TEMP-PLATE indicator dots are of a white or gray
color that turn black when exposed to an
overtemperature condition. Chemical contamination
can also cause the indicating dots to turn black.
a. For 206L3 helicopters, examine main driveshaft for
visual damage and couplings for grease leakage. Check
driveshaft for freedom and smoothness of axial movement.
Inspect bolts for security. Inspect TEMP-PLATES for evidence
of overheating indication, deterioration, debonding, or excessive
discoloration of the epoxy overcoating.
2. For 206L3+ IGW Upgrade helicopters, examine the engine
to transmission KAflex driveshaft for condition and security.
Examine the components as follows:
a. Driveshaft for cracks, corrosion, and surface damage.
b. Flexframe and bolts for condition and signs of slippage.
Chapter 96 ELECTRICAL
1. Examine all electrical components, wires, cables and
connectors in the area of the forward deck and transmission for
chafing, general condition, and security.
5-16. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 1 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...