CESSNA SECTION 4
MODEL 172S NAV III NORMAL PROCEDURES
GFC 700 AFCS
U.S.
BEFORE STARTING ENGINE
1. Preflight Inspection - COMPLETE
2. Passenger Briefing - COMPLETE
3. Seats and Seat Belts - ADJUST and LOCK (verify inertia reel
locking)
4. Brakes - TEST and SET
5. Circuit Breakers - CHECK IN
6. Electrical Equipment - OFF
7. AVIONICS Switch (BUS 1 and BUS 2) - OFF
THE AVIONICS SWITCH (BUS 1 AND BUS 2) MUST BE
OFF DURING ENGINE START TO PREVENT POSSIBLE
DAMAGE TO AVIONICS.
8. FUEL SELECTOR Valve - BOTH
9. FUEL SHUTOFF Valve - ON (push full in)
172SPHBUS-00
4-11
To Next Page
Loading...
