©Copyright Task Force Tips LLC 2008-2021 3 LIY-300 January 13, 2021 Rev18
TABLE OF CONTENTS
1.0 MEANING OF SAFETY SIGNAL WORDS
2.0 SAFETY
3.0 GENERAL INFORMATION
3.1 MECHANICAL SPECIFICATIONS
3.2 ELECTRICAL SPECIFICATIONS
3.3 OPERATING ENVELOPE
3.4 USE WITH SALT WATER
3.5 VARIOUS MODELS AND TERMS
3.6 INLETS AND OUTLETS
3.7 OVERALL DIMENSIONS
4.0 INSTALLATION
4.1 ELECTRICAL INSTALLATION
4.2 STRUCTURAL REQUIREMENTS
4.3 QUICK CONNECT INLET AND TRAVEL RANGES
4.4 TRAVEL STOPS
4.5 NOZZLE INSTALLATION
4.6 PRESSURE GAUGE PORT
4.7 TILLER HANDLE INSTALLATION
4.8 DRAINING RESIDUAL WATER
5.0 OPERATING INSTRUCTIONS
5.1 MANUAL (TILLER) MODEL SPRAY TRAJECTORY ADJUSTMENT
5.2 OPERATION OF OSCILLATING MONITORS
5.2.1 HORIZONTAL ROTATION CONTROL
5.2.2 ELEVATION CONTROL
5.2.3 TO ENGAGE THE OSCILLATING MECHANISM
5.2.4 TO DISENGAGE THE OSCILLATING MECHANISM
5.2.5 COVERAGE AREA OF THE OSCILLATING MONITOR
5.3 OPERATION OF RC MODELS
5.4 RECOMMENDED PARK POSITION
5.5 OVERRIDE KNOBS
6.0 FLOW CHARACTERISTICS
6.1 STACKED TIPS FLOW AND REACH
6.2 TORNADO MONITOR AND STREAM STRAIGHTENER FRICTION LOSS
6.3 STREAM STRAIGHTENERS
6.3.1 STREAM STRAIGHTENERS WITH STACKED TIPS
6.3.2 STREAM STRAIGHTENERS WITH FOG NOZZLES
7.0 WARRANTY
8.0 MAINTENANCE
8.1 SERVICE TESTING
8.2 LUBRICATION
8.3 TROUBLESHOOTING
8.4 REPAIR
9.0 EXPLODED VIEWS AND PARTS LISTS
10.0 OPERATION AND INSPECTION CHECKLIST
To Next Page
Loading...
Need help?
General
