To Next PageTo Next PageHow to fix leaks in TFT Monsoon?
Leaks in your TFT Firefighting Equipment are often due to debris or damage in the seal area. To resolve this, clean out any debris that may be present, or replace the damaged parts.
Why is my TFT Monsoon's horizontal rotation binding?
If your TFT Firefighting Equipment is experiencing horizontal rotation binding, this could be due to debris or damage to the horizontal drive parts. Try cleaning out any debris or replacing the damaged parts. Also, a lack of lubricant can cause this issue, so ensure you grease the equipment as indicated.
What to do if TFT Monsoon Firefighting Equipment has elevation binding?
If your TFT Firefighting Equipment is experiencing elevation binding, it may be caused by debris or damage to the elevation drive parts. Cleaning out the debris or replacing any damaged parts might resolve the issue. Another possible cause is a lack of lubricant. Make sure to grease it.
General| Brand | TFT |
|---|---|
| Model | Monsoon Series |
| Category | Firefighting Equipment |
| Language | English |
Details on weight, flow areas, pressure limits, materials, torque, and speeds.
Details structural load requirements and flange bolt tightening for monitor mounting.
Instructions for mounting inlet adapters and setting travel limits.
Describes using the handwheel for horizontal monitor movement.
Explains using the handwheel for vertical monitor movement.
Tables and graphs detailing flow rates and stream reach for stacked tips.
