TFT Monsoon Series - Safety Precautions; General Information; Installation Procedures; Monitor Operation

©Copyright Task Force Tips LLC 2004-2018 LIY-200 October 11, 2018 Rev18
3
1.0 Meaning of Safety Signal Words ............................................. 3
2.0 Safety ..............................................................................3
3.0 General Information ........................................................... 4-11
3.1 Mechanical Specifi cations
3.2 Part Identifi cation and Models
3.3 Inlets and Outlets
3.3.1 Inlet Options and Additional Height
3.3.1.1 Flanges
3.3.1.2 NPT Female
3.3.1.3 BSP Male
3.3.1.4 Mating Products
3.3.2 Outlet Options
3.4 Overall Dimensions
4.0 Installation ....................................................................... 11-16
4.1 Structural Requirements for Monitor Mounting
4.2 Inlet Mounting and Travel Ranges
4.2.1 Two Piece Clamp Rotational Lock Installation
Instructions
4.2.2 Extend-a-Gun RC Installation
4.2.3 Horizontal Rotation Travel Stops
4.2.4 Elevation Travel Stops
4.3 Nozzle Installation
4.4 Pressure Gage Port
4.5 Handle Installation Instructions
4.6 Drain
4.7 Ladder Monitor Installation
5.0 Operation .......................................................................16-17
5.1 Horizontal Rotation Control
5.2 Elevation Control
5.3 Tiller Bar Model
5.4 Recommended Park Position
5.5 Override Knobs
6.0 Flows and Pressures ........................................................17-24
6.1 Stacked Tips Flow and Reach
6.1.1 YST-4NM Flow and Reach
6.1.2 MST-4NJ Flow and Reach
6.2 Automatic Masterstream Nozzles
6.3 Monsoon Monitor Friction Loss
6.4 Stream Straighteners
6.4.1 Stream Straighteners with Stacked Tips
6.4.2 Stream Straighteners with Fog Nozzles
7.0 Monsoon Drawings Parts List ..........................................26-32
7.1 Manual Monsoon Drawing & Parts List
7.2 Monsoon RC Drawing & Parts List
7.3 Monitor Control Box
7.4 Monitor Motor Enclosure
8.0 Warranty ............................................................................ 34
9.0 Maintenance and Inspection .................................................34
9.1 Lubrication
10.0 Troubleshooting ....................................................................35
11.0 Repair ............................................................................ 35
12.0 Answers to Your Questions .................................................. 35
13.0 Inspection Checklist .............................................................36
Table Of Contents