©Copyright Task Force Tips LLC 2004-2018 LIY-200 October 11, 2018 Rev18
35
10.0 TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE REMEDY
Leaks Debris or damage in seal area Clean out debris or replace damaged parts
Elevation Binding Debris or damage to elevation drive parts Clean out debris or replace damaged parts
Lack of lubricant Grease, see section 9.1
Horizontal Rotation
Binding
Debris or damage to horizontal drive parts Clean out debris or replace damaged parts
Lack of lubricant Grease, see section 9.1
11.0 REPAIR
Factory service is available with repair time seldom exceeding one day in our facility. Factory serviced appliances are repaired by
experienced technicians to original specifi cations, fully tested and promptly returned.
Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability
for damage to equipment or injury to personnel that is a result of user service.
For additional information on care, maintenance and testing, refer to: NFPA 1962: Standard for the Care, Use, Inspection,
Service Testing, and Replacement of Fire Hose, Couplings, Nozzles, and Fire Hose Appliances, 2013 Edition
12.0 ANSWERS TO YOUR QUESTIONS
We appreciate the opportunity of serving you and making your job easier. If you have any problems or questions, our toll-free
“Hydraulics Hotline”, 800-348-2686, is normally available to you 24 hours a day, 7 days a week.
To Next Page
Loading...
Need help?
General
