TFT Monsoon Series - Monsoon Monitor Friction Loss

©Copyright Task Force Tips LLC 2004-2018 LIY-200 October 11, 2018 Rev18
24
6.2 AUTOMATIC MASTERSTREAM NOZZLES
Automatic nozzles maintain a constant pressure by adjusting their orifi ce to match the available fl ow. Consult the nozzle manufacturer
for maximum fl ow and pressure range. In all cases do not exceed the safe operating envelope in Fig 3.1.1. See LIM-030 Masterstream
nozzle series for information about TFT’s Masterstream nozzles.
6.3 MONSOON MONITOR FRICTION LOSS
The discharge size of the monitor determines maximum fl ow. Excessive turbulence will result if maximum fl ow is exceeded.
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
0 1000 2000 3000 4000 5000 6000 7000 8000 9000
0
2
4
6
8
10
12
14
16
18
20
22
0 250 500 750 1000 1250 1500 1750 2000 2250 2500
LOSS (BAR)
FLOW (LPM)
LOSS (PSI)
FLOW (GPM)
Fig 6.3a
3.5” Monsoon Monitor Friction Loss
0.0
0.1
0.2
0.3
0.4
0 1000 2000 3000 4000
0
1
2
3
4
5
6
0 250 500 750 1000 1250
LOSS (BAR)
FLOW (LPM)
LOSS (PSI)
FLOW (GPM)
Fig 6.3b
2.5” Monsoon Monitor Friction Loss