29
2-3 FINAL GEAR OIL
Watch: Please place main stand to park the
motorcycle for inspection. Clean grease
around the drain plug.
Disassembly:
Oil refill plug.◎
Oil drain plug.◎
Note: Put an used oil tray under the gearbox
before removing the drain bolt plug.
Inspection: Check if the oil drain plug washer
is damaged. Please replace with new one if it
is damaged.
Drain gear oil. ◎
Assembly:
■ Assembly drain plug.
■ Refill gearbox oil.
■ Reinstall oil refill plug.
Note:
(1) Torque on drain plug: 90 ~ 150 kg-cm.
(2) Oil type: SAE 90 #
(3) Oil capacity
* BH8 *
Gearbox disassembled : 110 c.c.
Regular Maintenance : 90 c.c.
* BR8 / BF8 / BR9 / BF9 *
Gearbox disassembled : 120 c.c.
Regular Maintenance : 100 c.c.
(4) Please check if there is any leaking after
oil refill.
To Next Page
Loading...
