Thales Cinterion MLA31-W - Introduction; Supported Products; Related Documents

Getting Started with 4G Modem Card
1 Introduction
16
t MLx31_startup_guide_v01 2021-05-06
Confidential / Prelimenary
Page 5 of 17
1 Introduction
This document describes a ready-to-use development and test environment for the Thales 4G
Modem Card.
The development and test environment comprises the following hardware components
• 4G Modem Card MLA31-W or MLP31-W
• 4G Modem Card Adapter Board
The purpose of this document
1
is to guide you through the process of connecting the hardware,
installing the supplied drivers on a Microsoft
®
Windows 10 system and getting started with 4G
Modem Card.
1.1 Supported Products
This document applies to the following Thales 4G Modem cards:
•Cinterion
®
MLA31-W
•Cinterion
®
MLP31-W
4G Modem Card in this document refers to all of the above mentioned product variants. Where
necessary a note is made to differentiate between these product variants.
1.2 Related Documents
[1] MLx31-W Hardware Interface Description
1.
The document is effective only if listed in the appropriate Release Notes as part of the technical docu-
mentation delivered with your Thales module.