2. Fit eight cage nuts into the rack space where you want to install the appliance. Ensure that they are spaced
correctly.
3. Install the two side rails on either side of the appliance, using the included screws and a Phillips screwdriver.
Note how the sliding rear brackets fit into the side rails.
4. Install the two sliding rear brackets in your equipment rack using four rack mounting screws.
NOTE While any standard equipment rack screws should fit the brackets, certain large-
headed screws may interfere with the operation of the secure locking bezel.
KeySecure k570 Appliance : Installation Guide
16 June 2020,Copyright© 2020 Thales Group.All rights reserved.
14
To Next Page
Loading...