Thales KeySecure k570 - Connector;Client Licensing

In the KeySecure GUI, select Settings > Licenses.
2.
Copy the 'Key Manager Lock Code'.
3. To receive a license string, go to the Gemalto Sentinel Cloud EMS Portal at:
https://dplicense.gemalto.sentinelcloud.com/ems/customerLogin.html
4. Past in the 'Key Manager Lock Code' to generate a license string.
5. Copy the License String from the portal.
6.
In the KeySecure GUI, activate your product by pasting in the License String in the License String field.
To activate a license using the KSCTL
1. Retrieve the 'Key Manager Lock Code'.
$ ksctl licensing lockdata
2. To receive a License String, go to the Gemalto Sentinel Cloud EMS Portal at:
https://dplicense.gemalto.sentinelcloud.com/ems/customerLogin.html
3. Enter the Key Manager Lock Code to generate a license string.
4. Activate your product by entering the License String.
$ ksctl licensing licenses add -l "<license string>"
Connector/Client Licensing
A separate and unique 'Connector Lock Code' is provided by each NextGen KeySecure Server. This lock code
is used to license supported SafeNet Connectors/Clients, e.g. SafeNet ProtectFile, as well to activate the KMIP
interface.
NOTE Unlike the 'Key Manager Lock Code', the 'Connector Lock Code' is cluster-wide.
This means that a license applied using the Connector Lock Code replicates across the
cluster.
For connector licensing details, refer to Administrator Guide for the specific SafeNet connector you are using.
Refer to the NextGen KeySecure Release Notes > Compatibility section for information on supported SafeNet
Connectors.
The Connector Lock Code is also used to license the KMIP interface. For details, refer to "KMIP Licensing" in
the KMIP Reference Guide.
KeySecure k570 Appliance : Installation Guide
16 June 2020,Copyright© 2020 Thales Group.All rights reserved.
35