Thecus M3800 User Manual

System Settings
The System menu gives you a wealth of settings that you can use to configure
your M3800’s system administration functions. You can set up system
notifications, view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu, choose the
Notification item, and the Notification
Configuration screen appears. This screen
lets you have the M3800 notify you in case
of any system malfunction. Press Apply to
confirm all settings. See following table for a
detailed description of each item.
Notification Configuration
Item Description
Beep Notification Enable or disable the system beeper that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
Auth Type Select the SMTP Server account authentication type.
SMTP Account ID Set the SMTP Server Email account ID.
Account Password Enter a new password.
Confirm Account
Password
Confirm a new password.
Receiver’s E-mail
Address
Add one or more recipient’s email addresses to receive email
notifications.
Test E-Mail Click to send out a test e-mail to make sure the settings are
correct.
System Logs
From the System menu, choose the Logs item
and the System Logs screen appears. This
screen shows a history of system usage and
important events such as disk status, network
information, and system booting. See the
following table for a detailed description of each
item:
42
Consult with your mail server
administrator for email server
information.
NOTE

Thecus M3800 Specifications

General

Brand	Thecus
Model	M3800
Category	Server
Language	English