EasyManua.ls Logo

THERMACUT EX-TRAFIRE 75SD - Available Accessories; Air Filtration and Couplings

THERMACUT EX-TRAFIRE 75SD
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EX-TRAFIRE
®
75SD
Operator Manual, Revision T-5 8-53
Filter-EX Compressed Air Filter with replacement filter cartridge
EX-0-804-001 - Filter-EX Compressed Air Filter
(Standard package 1 piece)
EX-0-804-002 - Filter-EX Air Filter Cartridge
(Standard package 8 pieces)
Technical specification
Filtering Degree: 0�01 μinch – 0�25 μm
Maximum Pressure: 125 PSI – 8�5 bar
Maximum Flow @ 80%: 2700 SCFH – 1250 l/min�
Temperature Range: 15 – 140F / −10 +60 °C
Size Pipe: ¼ NPT
Dimension: Ø 5�2“ × 7�9“ – Ø 132 × 200 mm
This filter does not fall under the specification of pressure equipment and requires no revision�
Advantages of using the Filter-EX Compressed Air Filter:
Removes solid particles, aerosols, and moisture from the compressed air
Elimination of the negative effects caused by humidity during cutting�
Extends the service life time of the torch, leads and consumables�
Reduces the risk of torch and power supply damage�
Positive effect on the quality of the cut�
Filter-EX Quick Connect Couplings
EX-0-802-000
DN 7�2 ES Quick Connect Plug
with female thread G 1/4“
EX-0-802-001
DN 7�2 ES Quick Connect Plug
with male thread G 1/4“
EX-0-802-002
DN 7�2 ES Quick Connect Coupling
with male thread G 1/4“
SECTION 8: ACCESSORIES
SECTION 8�
ACCESSORIES