Need help?Do you have a question about the Thermal Arc 400 GTSW AC/DC and is the answer not in the manual?
General| Output Current Range | 5-400 A |
|---|---|
| Input Voltage | 230/460 V |
| Rated Output | 400 A @ 36 VDC, 60% Duty Cycle |
| Welding Processes | GTAW (TIG), SMAW (Stick) |
| Open Circuit Voltage (OCV) | 70 V |
| Weight | 85 kg (187 lbs) |
Defines terms like Note, Caution, and Warning used throughout the manual for clarity.
Discusses hazards from welding gases and fumes and necessary precautions.
Details protection measures for eyes and skin from welding arc radiation.
Covers dangers of electrical shock and procedures to prevent it.
Outlines risks of fire and explosion and their mitigation measures.
Addresses hearing protection and safe handling of compressed gas cylinders.
Details safe practices for using hoses and making gas connections.
Covers safe gas system pressurization and pacemaker interference concerns.
Lists industry standards and publications for further safety information.
Details product warranty terms, limitations, and conditions.
Provides technical data, capabilities, and physical dimensions of the welding machine.
Explains the meaning and implications of the welding power source's duty cycle rating.
Outlines requirements for choosing an appropriate installation location for the welder.
Provides procedures for safely moving and handling the welding equipment.
Guides on selecting, preparing, and connecting weld output cables for optimal performance.
Instructions for properly connecting the shielding gas supply to the unit.
Explains how to connect remote controls via the 14-pin receptacle.
Details requirements and procedures for connecting the unit to the electrical power supply.
Describes the function of each control, switch, and indicator on the front panel.
Explains how to adjust sloper and pulser controls for advanced welding parameters.
Highlights critical safety measures to follow during welding operations.
Provides step-by-step instructions for various welding modes (GTAW, GTAW-P, SMAW).
Guides on proper preparation and selection of tungsten electrodes for different welding tasks.
Outlines basic cleaning and inspection tasks for maintaining the unit.
Offers solutions for common operational problems and symptoms.
Lists catalog numbers and descriptions for available replacement parts.
To Next Page