Need help?Do you have a question about the Thermal Arc 400MSTW CC and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Output Current Range | 5 - 400 A |
| Input Voltage | 208/230/460 V |
| Welding Processes | GTAW (TIG), SMAW (Stick) |
| Duty Cycle | 60% at 400A |
Explains the categorization and importance of notes, cautions, and warnings used throughout the manual.
Details critical safety measures for operating plasma arc welding equipment, covering hazards like fumes, gases, electric shock, fire, and noise.
Explains how to safely connect the welding power source to the electrical input, including voltage matching and fuse selection.
Guides users through selecting welding modes, setting parameters, and preparing for operation, including specific welding processes.
Lists common faults encountered during welding operations, categorized by power issues and poor weld quality.
Provides a structured guide to diagnose and resolve specific welding output issues, with causes and remedies.
Lists error codes generated by the welding machine, their meanings, and recommended actions for resolution.
To Next Page