Thermia ATEC Commissioning

10 Installation protocol and customer info
Fill in the Installation protocol in the User Guide.
After installation and test operation, the customer must be informed about their new heat pump installation. In the User guide there is a
checklist regarding the information that the installer must give the customer.
N
The serial number must always be given for warranty matters. The serial number is on the type plate, which is
attached to the heat pump and control unit.
Commissioning Atec
Thermia Värmepumpar VIGFG102
29

Thermia ATEC Specifications

General

Brand	Thermia
Model	ATEC
Category	Heat Pump
Language	English