Thermo Pride OH8FA119D60C - User Manual

MO-437
ECN 5550-MA 180910 Made IN USA
OIL FIRED FURNACE
INSTALLATION AND OPERATION MANUAL
WITH USERS INFORMATION SECTION
MODEL:
OH6FA072D48B OH6FA072DV4B OH8FA119D60B OH8FA119DV5B
OH6FA072D48R OH6FA072DV4R OH8FA119D60R OH8FA119DV5R
OH6FA072D48N OH6FA072DV4N OH8FA119D60C OH8FA119DV5C
OH6FA072D48C OH6FA072DV4C
OH6FX072DV4R
c
WARNING: IF THE INFORMATION IN THESE INSTRUCTIONS IS NOT FOLLOWED EXACTLY, A
FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR
LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE
VICINITY OF THIS OR ANY OTHER APPLIANCE.
c
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR
MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL. FOR
ASSISTANCE OR ADDITIONAL INFORMATION CONSULT A QUALIFIED INSTALLER, OR SERVICE
AGENCY.
PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION, INITIAL FIRING, AND BEFORE
PERFORMING ANY SERVICE OR MAINTENANCE. THESE INSTRUCTIONS MUST BE LEFT WITH
THE USER AND SHOULD BE RETAINED FOR FUTURE REFERENCE BY QUALIFIED SERVICE
PERSONNEL.
THERMO PRODUCTS, LLC.
PO BOX 217
NORTH JUDSON, IN 46366
PHONE: 800-476-4328

Summary

SAFETY SECTION

General Safety Warnings

Critical warnings and cautions for safe furnace operation, installation, and maintenance.

GENERAL INSTRUCTIONS

Installation and Setup Guidance

Essential steps and considerations before commencing furnace installation.

CHIMNEY AND VENTING

Chimney Installation and Maintenance

Proper chimney connection, height, and prevention of condensation.

BURNER INSTALLATION

Burner Mounting Procedure

Steps for correctly mounting the oil burner onto the furnace.

OIL TANK AND PIPING

Oil Supply Line Installation

Guidelines for selecting and installing oil storage tanks and supply lines.

ELECTRICAL WIRING

Electrical Installation Requirements

Electrical grounding, voltage, and wiring standards for the appliance.

BLOWER MOTOR SPEED SELECTION

Adjusting Blower Speed

Procedures for selecting and adjusting blower motor speeds for heating and cooling.

STARTUP PROCEDURES

Initial Heating System Startup

Initial startup steps for the heating system, including safety checks.

TROUBLESHOOTING

Diagnostics and Cad Cell Testing

Procedures for diagnosing issues and checking the cad cell sensor.

SEQUENCE OF OPERATIONS FLOW CHART

Control System Operation Sequence

Flowchart illustrating the step-by-step operation of the control system.

TROUBLESHOOTING FLOW CHART

Troubleshooting Decision Tree

A flowchart to help identify and resolve operational problems.

Thermo Pride OH8FA119D60C Specifications

General

Model	OH8FA119D60C
Type	Oil Furnace
Heating Capacity	119, 000 BTU
Fuel Type	Oil
Height	35 inches
Width	21 inches
Depth	33 inches
BTU Output	119, 000 BTU
Output BTU	119, 000 BTU
Blower Motor Type	PSC
Blower Speed Settings	4
Ignition Type	Electronic