Thermo Pride OD6FA072D48 - User Manual

MO-545 Made in USA
ECN 5539-MA 210122
OIL-FIRED CENTRAL FURNACE
Installation, Operation, and Service Manual
With Users Information Section
Models:
OD6FA072D48(B/R/C) OD6RA072D48(B/R/C)
OD6FA072DV5(B/R/C) OD6RA072DV5(B/R/C)
c
WARNING: IF THE INFORMATION IN THESE INSTRUCTIONS IS NOT FOLLOWED EXACTLY, A FIRE OR
EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
c
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR MAINTENANCE CAN
CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL. FOR ASSISTANCE OR ADDITIONAL
INFORMATION CONSULT A QUALIFIED INSTALLER, OR SERVICE AGENCY.
c
AVERTISSEMENT: SI L'INFORMATION DANS CES INSTRUCTIONS N'EST PAS SUIVI À LA LETTRE, UN
INCENDIE OU UNE EXPLOSION ENTRAÎNANT DES DOMMAGES MATÉRIELS, DES BLESSURES
CORPORELLES OU DES PERTES DE VIE.
NE PAS ENTREPOSER NI UTILISER D'ESSENCE OU AUTRES VAPEURS ET LIQUIDES INFLAMMABLES À
PROXIMITÉ DE CET APPAREIL OU DE TOUT AUTRE APPAREIL.
c
AVERTISSEMENT: UNE MAUVAISE INSTALLATION, D'AJUSTEMENT, DE LA MODIFICATION,
D'ENTRETIEN OU DE MAINTENANCE PEUVENT CAUSER DES BLESSURES OU DOMMAGES MATÉRIELS,
REPORTEZ-VOUS À CE MANUEL POUR OBTENIR DE L'AIDE OU DES RENSEIGNEMENTS
SUPPLÉMENTAIRES, CONSULTER UN INSTALLATEUR QUALIFIÉ, OU ORGANISME DE SERVICE.
PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION, INITIAL FIRING, AND BEFORE
PERFORMING ANY SERVICE OR MAINTENANCE. THESE INSTRUCTIONS MUST BE LEFT WITH THE USER
AND SHOULD BE RETAINED FOR FUTURE REFERENCE BY QUALIFIED SERVICE PERSONNEL.
VEUILLEZ LIRE CES INSTRUCTIONS AVANT L'INSTALLATION, LES PREMIERS TIRS, ET AVANT
D'EFFECTUER TOUT ENTRETIEN OU MAINTENANCE. CES INSTRUCTIONS DOIVENT ÊTRE LAISSÉS AVEC
L'UTILISATEUR ET DEVRAIT ÊTRE CONSERVÉ POUR RÉFÉRENCE FUTURE PAR UN TECHNICIEN
QUALIFIÉ.
Manufactured by:
THERMO PRODUCTS, LLC.
PO BOX 237
DENTON, NC 27239

Summary

Notice to the Installer

Material and Workmanship

Details on quality checks and reporting defects for materials and assembly.

Packaging and Shipping Damage

Information on inspecting the furnace upon delivery and reporting any transit damage.

Warranties and Modifications

Explains warranty voidance due to unauthorized modifications and the importance of returning warranty cards.

Installation Guidelines

Codes and Regulations

Emphasizes adherence to local codes and NFPA standards for installation.

Installation Location and Clearances

Covers proper furnace placement and required clearances to combustible materials.

Combustion and Ventilation Air

Specifies requirements for adequate air supply for safe furnace operation.

Venting System Requirements

Details chimney inspection, flue/vent connector, and draft regulator installation.

Ductwork, Electrical, and Thermostat

Covers duct system, electrical connections, and thermostat installation requirements.

Burner and Fuel System Setup

Covers combustion chamber, oil burner, nozzle, and fuel system installation.

Initial Furnace Operation

Initial Burner Operation Procedures

Step-by-step guide for starting the oil burner for the first time.

Airflow and Temperature Settings

Instructions for setting supply/return airflow and achieving target temperature rise.

Furnace Limit and Blower Controls

Explains the function and setup of safety limits and blower controls.

Operational Modes Overview

Describes the different operating states like standby, fan, cooling, and dehumidification.

Service and Troubleshooting

Control Diagnostics and Indicators

Guide to interpreting status LEDs for furnace performance and fault detection.

Troubleshooting Common Issues

Provides steps to diagnose and resolve operational problems like no operation or short cycling.

Flame Sensor and Replacement Parts

Procedures for checking the flame sensor and identifying available replacement parts.

Maintenance Procedures

Air Filter Cleaning and Replacement

Instructions for maintaining the furnace air filter for optimal airflow.

Oil Burner Servicing

Recommendations for annual servicing of the oil burner for efficiency and safety.

Blower and Motor Care

Information on the maintenance requirements for the blower assembly.

Heat Exchanger Inspection and Cleaning

Guidelines for inspecting and cleaning the heat exchanger for efficient operation.

Flue and Chimney Inspection

Procedures for inspecting the venting system for safety and performance.

User Information and Operation

Operating Instructions and Safety

Key steps and safety warnings for operating the furnace.

Combustion and Ventilation Air Supply

Importance of air supply for furnace operation and inspection areas.

Inspection Areas for Safe Operation

Guidance on inspecting critical components like the burner compartment and exterior.

Appendix A: Startup Sheet

Appendix B: Electrical Diagrams

Appendix C: Specification Sheets

Appendix D: Replacement Parts

Beckett Burner Replacement Parts

List of replacement parts specific to the Beckett AFG oil burner model.

Riello Burner Replacement Parts

List of replacement parts specific to the Riello BF3 oil burner model.

Carlin Burner Replacement Parts

List of replacement parts specific to the Carlin EZ1 oil burner model.

Thermo Pride OD6FA072D48 Specifications

General

Brand	Thermo Pride
Model	OD6FA072D48
Category	Furnace
Language	English