Thermo Pride OD6FA072D48 - Appendix A: Startup Sheet

30
INITIAL
SERVICE
SERVICE
SERVICE
DRAFT -BREECH (IN W.C.)
DRAFT - OVERFIRE (IN W.C.)
DATE
CUSTOMER
HEATING
SYSTEM
COMBUSTION
TEST
Operate burner
for at least 10
min. before
taking
readings.
NOZZLE (GPH/ANGLE/CONE)
PUMP PRESS (PSI)
SAFTEY CONTROL OPERATION
CHECK FOR LEAKS
TECHNICIAN
ROOM TEMP (°F)
EFFICIENCY (%)
SUPPLY TEMP (°F)
RETURN TEMP (°F)
TEMP RISE (°F)
CO2 (%)
O2 (%)
GROSS FLUE TEMP (°F)
NAME
ADDRESS
CITY, STATE
FURNACE SERIAL
FURNACE MODEL
BURNER MODEL NO.
INSTALLER
NAME ADDRESS
PHONE
TYPE OF VENTING & OIL SYSTEM (CHECK ALL THAT APPLY)
□
SIDEWALL POWER
VENTER
□
DRAFT CONTROL
□
FUEL FILTER
□
2 PIPE SYTEM
□
MASONRY CHIMNEY
□
DIRECT VENT
□
COMBUSTION AIR KIT
□
CLAY LINER
□
METAL LINER
□
METAL CHIMNEY
□
MAKE UP AIR TO
MECANICAL ROOM
CO (PPM)
SMOKE NO.
APPENDIX A: STARTUP SHEET
Combustion and Efficiency Testing for Oil Fired Furnaces:
Complete this form for each oil furnace installed. Read instruction manual carefully before taking
test. Retain this form with furnace.