Thermo Pride OPA - Appendix H: Opa Heating and Cooling Test Form

All installations and services must be performed by qualified service personnel.
89
XVI. APPENDIX H: OPA HEATING AND COOLING SYSTEMS TEST FORM
Name:
Address:
City, State, & Zip Code:
Model No.:
Serial No.:
Burner Model No.:
Mfgr & Model of Fuel Oil Filter:
Combustion Tests * Service # 1 Service # 2 Service # 3
Combustion Chamber Condition:
Nozzle Size & Type:
Oil Pump Pressure (PSIG):
CO2 (%):
O2 (%):
Smoke No.:
Approximate Air Shutter Opening
(
% of max.
)
:
Gross Flue Gas Temp. (deg. F):
Ambient Air Temp. (deg. F):
Net Flue Gas Temp. (deg. F):
Thermal Efficiency (%):
Is Control Operation OK?
Any Oil Leaks?
Refrigeration Tests * Service # 1 Service # 2 Service # 3
Suction Line Pressure (PSIG):
Suction Line Temp. (deg. F.):
Sat. Temp. @ Evap.(deg. F.):
Evaporator Superheat (deg. F.):
Liquid Line Pressure (PSIG):
Sat. Temp. @ Cond.(deg. F.):
Liquid Line Temp. (deg. F.):
Condenser Subcooling (deg. F.):
Is Control Operation OK?
Any Refrigerant Leaks?
Tests Performed By:
Date:
Notes:
Name:
Address:
Phone No:
* Operate system for at least 10 minutes before taking measurements.
Customer
Appliance
Complete this form for each Thermo Pride OPA appliance installed. Read the instruction manual carefully
before makin
g
tests. Retain this form with a
pp
liance.
Technician
Installer
AFG-TP1501
Initial Installation
Initial Installation
Heating System
Cooling System