Thermo Scientific Heratherm IMH 60 User Manual

Essential safety guidelines for operating Heratherm incubators.

Critical rules to follow when working with Heratherm incubators for safe operation.

Specifies the required ambient conditions for incubator installation.

Details the necessary requirements for the installation location.

Steps for installing the shelf system in table-top units.

Instructions for installing perforated shelves.

Procedure for levelling the incubator.

Detailed steps for installing the stacking adapter.

Steps to install shelf support brackets.

Instructions for installing the anti-tilt anchor for safety.

Instructions for placing perforated shelves onto brackets.

Critical safety and connection guide for the mains power.

Detailed steps for connecting the incubator to power.

Overview of features for Heratherm IMH Series incubators.

Overview of features for Heratherm IMH-S Series incubators.

Details the safety features integrated into the incubators.

Describes the temperature sensing and control system of the incubators.

Guide for initiating incubator operation.

Guide on how to power up the incubator.

Instructions for safely powering down the incubator.

How to adjust the desired temperature set value.

Overview of the timer feature and its modes.

How to launch the built-in decontamination routine.

Initiating and performing temperature calibration.

Instructions for shutting down the incubator for extended periods.

Instructions on how to start the decontamination routine.

Steps to prepare for incubator temperature calibration.

Procedure for comparing incubator temperature with a measuring instrument.

Detailed procedure for manual temperature calibration.

Table listing error messages, root causes, and clearing instructions.

Technical specifications for IMH and IMH-S series.

Technical specifications for IMH 400-S and IMH 750-S series.