Need help?Do you have a question about the Thermo Scientific iCAP Qnova Series and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | iCAP Qnova Series |
| Category | Laboratory Equipment |
| Language | English |
Provides an overview of the guide's purpose and intended audience.
Explains text formatting, signal words, and safety symbols used in the manual.
Lists methods for contacting Thermo Fisher Scientific for support and information.
Specifies minimum dimensions for facility entrances, hallways, and doorways for instrument passage.
Details the physical size and weight of the instrument and its components for planning.
Provides instructions and precautions for safely transporting the instrument.
Guides on positioning the instrument, workbench, data system, and vacuum pump.
Specifies the required laboratory temperature range for optimal instrument performance.
Details requirements for instrument exhaust systems to remove gases and heat safely.
Lists heat output of instrument components to inform HVAC planning.
Outlines requirements for stable temperature and humidity for instrument operation.
States the maximum operating altitude for the instrument and contact info.
Emphasizes vibration-free floors and specifies noise level limits.
Details acceptable RF field limits and magnetic field strength.
Provides guidance on collecting and handling waste solvents during installation and operation.
Details nominal voltage, power consumption, wiring, and fuse requirements for the instrument.
Guides on locating wall outlets and connecting the instrument power cables.
Discusses power quality requirements and voltage disturbances affecting instrument performance.
Lists specifications for cooling water supply, temperature, pressure, pH, and conductivity.
Details Argon and additional gas requirements, connections, and purity for iCAP RQ.
Details Argon and additional gas requirements, connections, and purity for iCAP TQ/TQs.
Lists materials, gases, liquids, and sample matrices compatible with the instrument.
Guidance on receiving the instrument, checking for damage, and initial placement.
Outlines the process and responsibilities for instrument installation by a service representative.
Covers general environmental specs like lighting, particulate matter, and power quality.
To Next Page