Need help?Do you have a question about the Thermo Scientific IMH 60 and is the answer not in the manual?
General| Model | IMH 60 |
|---|---|
| Brand | Thermo Scientific |
| Category | Accessories |
| Temperature Range | Ambient +5°C to 60°C |
| Type | Incubating Microplate Heater |
General safety rules for operating Heratherm incubators.
Specific rules for safe operation of Heratherm incubators.
Details on the warranty terms for Heratherm incubators.
Explains safety symbols used in the operating instructions.
Defines the intended use of the Heratherm incubators.
Information about packaging materials and reusability.
Procedures for inspecting the incubator upon delivery.
Lists the components included with the incubator.
Requirements for the ambient environment for installation.
Specific requirements for the installation location.
Requirements for ventilation in the incubator room.
Specifies necessary clearances around the incubator.
Installation details for built-in incubator units.
Installation considerations for table-top models.
Installation details for floor-standing models.
Instructions on how to safely transport the incubator.
Information about the stacking kit for table-top units.
Procedure for installing the anti-tilt anchor.
General description of the Heratherm IMH Series incubators.
Specific overview of the Heratherm IMH-S Series incubators.
Features ensuring incubator safety and operation.
Details on temperature sensors and control system.
Connecting the incubator for data and alarm signals.
Connecting the incubator to the main power supply.
Description of components within the incubator's work space.
Details on the incubator's shelf system and installation.
Options and details for tube access ports.
Installation procedures specific to table-top units.
Steps for installing the shelf system.
How to install the perforated shelves.
Steps to prepare the incubator's interior space.
Procedures for levelling the incubator.
General commissioning procedures for the incubator.
Connecting the incubator to the main power supply.
How to connect the RS 232 interface.
Steps for connecting the incubator to a computer.
Instructions for wiring the alarm contact.
Steps to prepare the incubator before operation.
The procedure for starting the incubator's operation.
Overview of the incubator's control panel and its elements.
Descriptions of the functions of the control panel buttons.
Explanation of the different display panes and their content.
Explanations of the icons found in the menu bar.
Step-by-step instructions for powering up the incubator.
Procedure for safely powering down the incubator.
How to set the desired temperature for the work space.
Information about the timer feature and its modes.
How to launch the built-in decontamination routine for IMH-S models.
Instructions for turning the fan on and adjusting its speed.
Accessing settings for error log, calibration, date/time, etc.
How to access and read the incubator's error log.
How to initiate temperature calibration routines.
Options for setting and formatting date and time.
How to toggle temperature display between Celsius and Fahrenheit.
Instructions for shutting down the incubator for extended periods.
General cleaning guidelines and precautions for components.
Overview of the three-stage wipe/spray disinfection process.
Steps for predisinfection before cleaning.
Instructions for starting the decontamination routine.
Components to be checked for operational performance and safety.
Routine checks to be performed on the incubator.
Specific checks required for semi-annual inspection.
Overview of service work to be performed during ongoing operation.
Steps to prepare for a temperature comparison measurement.
Detailed procedure for performing a temperature comparison.
How to perform a manual temperature calibration.
Instructions for replacing the incubator's door seal.
Procedure for returning the incubator for repair.
Lists the materials used in the construction of the incubator.
Lists error messages, root causes, responses, and clearing instructions.
Technical specifications for IMH 60/100/180 and IMH 60-S/100-S/180-S series.
Technical specifications for IMH 400-S / IMH 750-S series.
List of available spare parts and accessories for the incubators.
A logbook for recording work carried out on the device.
Contact information for Thermo Fisher sales offices worldwide.
To Next Page