To Next PageTo Next Page
Need help?Do you have a question about the Thermo Scientific Lab-Line Imperial 3 and is the answer not in the manual?
Details electrical specifications including voltage, frequency, amps, and wattage for various models.
Specifies the operating temperature range for the incubators.
Provides internal and external dimensions for different incubator models.
Instructions for inspecting the shipping carton for damage upon delivery.
Guidelines for placing the unit on a level surface and ensuring proper air circulation.
Step-by-step instructions for installing incubator shelves and brackets.
Details power source requirements and grounding for 120V and 240V models.
Describes the function of each component on the incubator's control panel.
Crucial safety warnings regarding flammable materials, toxic fumes, and high temperatures.
Instructions on how to start up and set the over-temperature thermostat.
Explains the controller's self-test sequence and the heat ON indicator function.
Guides on how to view and adjust the temperature set point on the controller.
Details the steps for running the auto-tune program to optimize temperature control.
Procedures for checking status lamps and general cleaning of the unit.
Guidelines for cleaning and maintaining stainless steel surfaces, including pH factors.
Information on chemicals to limit exposure to and suitable cleansing agents for stainless steel.
Various methods for cleaning stubborn stains and effective disinfecting materials.
Instructions for replacing the unit's heaters.
Steps for removing and installing a new thermostat.
Guidance on replacing switches and status lamps on the control panel.
Detailed procedure for replacing the configured temperature controller.
Lists part numbers for fans, gaskets, heaters, and glass doors.
General| Brand | Thermo Scientific |
|---|---|
| Model | Lab-Line Imperial 3 |
| Category | Accessories |
| Language | English |
