EasyManua.ls Logo

Thermo Scientific Thermo Fisher 3900 Series User Manual

Thermo Scientific Thermo Fisher 3900 Series
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
Thermo Fisher Model 3900 Series
Bod/Fly
Incubators
Operating and Maintenance Manual 7003900
January
2013
Question and Answer IconNeed help?

Do you have a question about the Thermo Scientific Thermo Fisher 3900 Series and is the answer not in the manual?

Thermo Scientific Thermo Fisher 3900 Series Specifications

General IconGeneral
BrandThermo Scientific
ModelThermo Fisher 3900 Series
CategoryAccessories
LanguageEnglish

Summary

Introduction

General Safety Considerations

Essential safety guidelines for incubator operation and handling.

Receiving and Inspection

Installation

Power and Location Requirements

Requirements for power supply and optimal placement of the incubator.

Safe Lifting and Handling

Instructions for safely moving and positioning the heavy incubator unit.

Leveling and Air Duct Installation

Procedures for ensuring stability and proper airflow via air duct installation.

Initial Cleaning Procedure

Steps for initial cleaning of the incubator interior before use.

Controls Overview

Main Temperature & Safety Controls

Details on main temperature control, OTL, and safety indicator lights.

Quick Start Guide

A brief guide to get the incubator running quickly with preprogrammed settings.

Control Panel Glossary

Definitions of terms and symbols used on the control panel and in programming.

Programming Day/Night Cycles

Step-by-step instructions for setting up timed temperature cycles.

Operation

Setting Main Temperature

Process for adjusting the desired chamber temperature setpoint.

Calibrating Temperature Control

Steps for calibrating the incubator's temperature accuracy using a reference thermometer.

Setting Over Temperature Limit

Procedure to set the upper limit for temperature protection to prevent overheating.

Loading and Airflow Guidelines

Guidelines for proper loading and ensuring adequate airflow for temperature uniformity.

Maintenance

Cleaning Procedures

Detailed steps for safely cleaning the incubator's interior.

Disinfection and Preventative Checks

Methods for disinfecting the incubator and performing routine checks on door seals.

Troubleshooting

General Checks and Temperature Issues

Initial checks and common solutions for temperature-related problems.

Mechanical and Calibration Issues

Guidance for resolving mechanical noises and calibration discrepancies.

Parts and Specifications

Component Parts List

A detailed list of replacement parts for various incubator models.

Technical Specifications

Key technical data including dimensions, capacity, and power requirements.

Related product manuals