THERMO ELECTRON CORPORATION LAMINAR FLOW EQUIPMENT WARRANTY INTERNATIONAL
The Warranty Period starts two months from the date your equipment is shipped from our facility. This allows shipping
time so the warranty will go into effect at approximately the same time your equipment is delivered. The warranty protec-
tion extends to any subsequent owner.
During the first thirty six (36) months, component parts proven to be non-conforming in material or workmanship will be
repaired or replaced at Thermo’s expense, excepting labor. Installation, calibration and certification is not covered by this
warranty agreement. The Technical Services Department must be contacted for warranty determination and direction
prior to performance of any repairs. Expendable items, glass, filters and gaskets are excluded from this warranty.
Replacement or repair of component parts or equipment under this warranty shall not extend the warranty to either the
equipment or to the component part beyond the original warranty period. The Technical Services Department must give
prior approval for return of any component or equipment. At Thermo’s option, all non-conforming parts must be returned
to Thermo postage paid and replacement parts are shipped FOB destination.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR
IMPLIED. NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY.
Thermo shall not be liable for any indirect or consequential damages including, without limitation, damages to lost profits
or loss of products.
Your local Thermo Sales Office is ready to help with comprehensive site preparation information before your equipment
arrives. Printed instruction manuals carefully detail equipment installation, operation and preventive maintenance.
If equipment service is required, please call your Technical Services Department at 1-888-213-1790 (USA or Canada) or
1-740-373-4763. We’re ready to answer your questions on equipment warranty, operation, maintenance, service, and
special applications. Outside the USA, contract your local distributor for warranty information.
ISO
9001
REGISTERED
Rev. 3 4/03
To Next Page
Loading...
