MULTISKAN RC and MS SERVICE MANUAL
Multiskan MS is equipped with adjustment
programsdescribedinthefollowing
text. First
Testing and adjusting
you must put a pin
4
up. "ADJUSTMENTS"
and "TESTS" programs main menu is entered
by pressing TALC MODEw-key. Following
uik-in Adj. Programs
adjustment programs menu can
be
entered by
selecting "ADJUSTMENTS" from the main
menu:
1.
TRACK ADJUST
2.
ADOFFSET
3.
LIGHT ALL
4.
BLACK ALL
5.
MIMACHANNEL
6.
LIGHT CHANNEL
7.
BLACK CHANNEL
8.
LI-BL CHANNEL
9.
CONT. MEAS
10.
CLOCK FREQUENCY
Selection is carried out by pressing "ENTER-key when the wanted program name is displayed.
All adjustment programs, except program
10,
can be interrupted with "STOP-key.
Document Release Section Page
d2
Labsystems
3511352-100-X
1.0
8
28
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
