MULTISKAN RC and MS SERVICE MANUAL
2.
KEYBOARD
TEST
This test is used to check operation of the keyboard.
A) Select
"2
KEYBOARD" and press
Instrument displays the first key to be
"ENTER key. pressed.
B) Press the keys according to the display.
Next key to be pressed is displayed.
An audio signal is given when a key is pressed and if the input is correct, test program displays
the next key in sequence.
Test is terminated automatically after the last key is pressed.
Test can be interrupted by pressing "STOP-key.
3.
STABILITY-6HR
This test can be used to check the stability of the instrument. It can also be used as a fault-finding
program to track down infrequently occurring malfunction.
A) Select
"3
STABILITY
6HR"
and press
"ENTER-key.
B)
Enter instrument serial number,
After each measurement instrument displays
user code and filter to be used.
number of the measurements and the time
Press "START". before next measurement.
Instrument measures the whole plate every 10 minutes for
6
hours.
Program calculates MEAN, MIN, MAX, DELTA, S.D., DELTA% and CV% values using the
measurement results. After the instrument displays "TEST READY, values can
be
sent to
an
external printer by pressing "SEND ABSW-key.
Test can be interrupted by pressing "STOP-key.
4.
REPROD.
20
M.
This test can
be
used to check instrument's reproducibility over 20 measurements.
A) Select
"4
REPROD.20
M."
and press
"ENTER key.
B) Enter instrument serial number,
After each measurement instrument displays
user code and filter to be used.
themeasurement number. Aftermeasurements
Press "START".
instrument displays "TEST READY.
Instrument measures the whole plate
20
times.
Program calculates MEAN, MIN,
MAX,
DELTA, S.D., DELTA% and CV% values using the
measurement results. After the instrument displays "TEST READY, values can be sent to an
external printer by pressing "SEND ABS"-key.
Test can
be
interrupted by pressing "STOP-key.
Document Release
,%
Section Page
3511352-100-x
1
.O
%:..-
Labsystems
8
33
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
