Serial Communications 3104
REC XXXXX 3-3
BATCH NR: 0
SET PT: 0.00 Tons
TOTAL : 0.00 Tons
3.3.3 Alarms
The system can optionally print out each alarm (if the alarm has been turned
on in the Alarms Menu) in the following format:
09-10-2002 8:14a
High rate
where "High rate" is only an example of a possible alarm condition. Date and
time corresponds to when the alarm has occurred the first time.
3.3.4 Audit Trails
When Audit Trails is installed, the recorded data can be printed out in the
following format:
TRAIL RECORD NR 1
DATE 09-10-2002 TIME 11:59p
VARIABLE scale cap
NEW 400.00
OLD 500.00
TRAIL RECORD NR 2
DATE 09-10-2002 TIME 11:31p
VARIABLE span
NEW 250000
OLD 300000
TRAIL RECORD NR 3
DATE 09-10-2002 TIME 11:59p
VARIABLE div (e)
NEW 0.05
OLD 0.1
Each record contains a description of the variable which has been altered, the
old and the new values of the variable, and an index number.
3.4 Communication Set-Up
This section explains the communication and printer set-up. See Section 3.5 for
communication protocols detailed description.
To Next Page
Loading...
Need help?
General
